This page contains 2024 WAEC and JAMB subject combinations (admission requirements) for Metallurgical and Materials Engineering, including the list of Nigerian universities offering this course, A level requirements and much more.

 

CourseMetallurgical and Materials Engineering
QualificationB. Eng., B.Sc., B. Tech.
Duration3 – 4 Years
SuitabilityScience students

Is Metallurgical and Materials Engineering a good course in Nigeria and what is the salary?

Yes, Metallurgical and Materials Engineering is a good course in Nigeria with plenty of job roles to explore. There is no standard salary for any job in Nigeria. It depends on where you get the job. Metallurgists and related professionals typically earn between ₦80,000 and ₦450,00 net per month

A Metallurgical and Materials Engineering degree is not competitive and quite popular amongst students in secondary school. From our records, 15 Nigerian universities offer this degree course.

So while you are here to get information on the O level subject combination for Metallurgical and Materials Engineering, we also expect you consider the total number of students currently studying Metallurgical and Materials Engineering and the employment rate we will show you below so that you will know what you are up against when you choose to study this course.

We have some student guide articles that will be of benefit to you.

 

WAEC Subject Combination For Metallurgical and Materials Engineering

In WAEC, NECO or GCE, you are expected to register a maximum of 9 subjects for a Metallurgical and Materials Engineering degree. You can register for less than 9 subjects if you are resitting.

However, you must have at least 5 credit passes amongst the 9 subjects listed below before you can gain admission into any Nigerian university to study for a Metallurgical and Materials Engineering degree.

Remember, the requirement you’re about to read is also applicable to all o level examinations. (WAEC, NECO and GCE). We have painstakingly highlighted (in red) the core subjects on which you must obtain credit before gaining admission. Any subject with blue colour means, a pass is allowed.

If you fail one of the core subjects, you should read through each university’s special requirements for this course below to see if there is a university that may accept another subject in lieu of the one you failed. The 9 WAEC/NECO/GCE subject combinations for Metallurgical and Materials Engineering are:

  1. English Language
  2. Mathematics
  3. Civic Education
  4. Chemistry
  5. Further Mathematics
  6. Physics
  7. Geography
  8. Biology
  9. A trade subject

If you have your O level result already and the subjects you have is not the same as the admission requirement that is the required O level subject combinations to study Metallurgical and Materials Engineering, don’t give up. You should consider other Metallurgical and Materials Engineering similar courses or look at Polytechnic or College of Education related course subject requirements.

You can also study online with a foreign university right from your bedroom or apply for a scholarship to study abroad. Education is now a choice. And please before you make a decision on which University to choose, please read valuable guides on how to choose a course and university

Metallurgical and Materials Engineering Course Description:

Before you consider the O level requirement for this course, it is good you know what this course is all about. Metallurgy is a domain of materials science that studies the physical and chemical behaviour of metallic elements, their intermetallic compounds and their mixtures called alloys. Metal plays a vital role in almost every aspect of modern life.

It also encompasses the study of exotic material, pure and combined which has application in various industries. It is one of the most important branches of engineering as modern applications nowadays require a material with high strength and low weight along with other factors.

Metallurgical Engineers extract, refine and recycle metals. They solve problems such as reducing corrosion, maintaining heat levels and increasing the strength of the product. They help develop or improve metals that are used in the healthcare, transportation, defence and entertainment industry.

The work of a metallurgical engineer impacts other engineering fields. They develop core materials that can enhance the function of many products and systems.

The three main branches of the Metallurgical Engineering Course are physical metallurgy, extractive metallurgy and mineral processing. Physical metallurgy deals with problem-solving i.e. development of metallic alloys needed for different types of manufacturing and construction. Extractive metallurgy involves extracting metal from ore. Mineral processing involves gathering mineral products from the earth’s crust.

JAMB subject combination for Metallurgical and Materials Engineering

For this degree, you are also required to register for 4 subjects and English is compulsory. More so, your JAMB score in addition to your POST UTME score will determine the cumulative score that the university will use to decide your candidacy for admission.

You should score 200 or above in JAMB to stand a better chance of gaining admission to study Metallurgical and Materials Engineering. You can still gain admission if you score between 180-190 upward but you do not stand a chance with those who had scored higher. Try out JAMB Admission Simulator.

The 4 JAMB subject combination for Metallurgical and Materials Engineering is:

  1. English Language
  2. Mathematics
  3. Physics
  4. Chemistry

I want you to read this

Direct Entry requirement (required A-level result) to study Metallurgical and Materials Engineering

  • Two ‘A’ level passes from Chemistry, Physics and Mathematics.
  • ND upper credit, NCE technical and HND in Mech. Engineering.

List of Universities offering Metallurgical and Materials Engineering in Nigeria

  1. Enugu State University of Science and Technology, Enugu (ESUT)
  2. Federal University of Technology, Akure
  3. Federal University of Technology, Owerri (FUTO)
  4. University of Ilorin (UNILORIN)
  5. University of Lagos (UNILAG)
  6. Obafemi Awolowo University, Ile-Ife (OAU)
  7. Nnamdi Azikiwe University, Awka (UNIZIK)
  8. Ondo State University of Science and Technology Okitipupa (OSUSTECH)
  9. Ahmadu Bello University, Zaria
  10. Kwara State University, Ilorin (KWASU)
  11. University of Lagos (UNILAG)
  12. University of Nigeria, Nsukka (UNN)
  13. University of Ilorin (UNILORIN)
  14. Federal University, Oye-Ekiti, Ekiti State
  15. Igbinedion University Okada
Estimated number of students currently studying Metallurgical and Materials Engineering in Nigerian Universities is 8,841
Metallurgical and Materials Engineering has 28% employment rate in Nigeria

Admission Rate:

Metallurgical and Materials Engineering has 85% admission rate.

Metallurgical and Materials Engineering is how many years course and under which faculty?

Depending on your mode of entry, Metallurgical and Materials Engineering is a three to four years course in Nigeria. According to JAMB, Metallurgical and Materials Engineering is under the Faculty of Engineering but may also be under a different faculty in some universities.

Can a commercial or art student study Metallurgical and Materials Engineering?

No! Metallurgical and Materials Engineering is a pure science course and not suitable for commercial or art student. But if you have the required subject combination in your O level result, you can go for it if that is the course you desire to study. If you’re still in secondary school, you may find it difficult to change subjects during WAEC registration because your schools may go against it. The alternative way to write the required subjects combination for Metallurgical and Materials Engineering is through GCE

 

Further Reading on Metallurgical and Materials Engineering Degree

Hey! Thanks for reading WAEC and JAMB Subjects for Metallurgical and Materials Engineering. If you like what you just read, give us a follow on Twitter using the button below and if you think this post can be helpful to somebody else, please share it using the buttons below. You can scroll down to see more articles that will interest you. 

Hi
Looking for what to study with your O-level result or preparing for jamb/olevel? Interested? Click Here
Looking for something? Use the search box below.

3 thoughts on “WAEC and JAMB Subjects for Metallurgical and Materials Engineering”

  1. I have bsc in acxounting, can I use my degree cert to do A level /direct entry to any Nigeria University or abroad tertiary institution?
    Pls u can mail me

Leave a Reply

Your email address will not be published. Required fields are marked *
Follow us on twitter.